UnknownSec Bypass 403

: /var/lib/dpkg/info/ [ drwxr-xr-x ]
name : snapd.postinst #!/bin/sh set -e # "powerpc" is not supported unfortunately, do nothing here# if [ "$DPKG_MAINTSCRIPT_ARCH" = powerpc ]; then exit 0 fi case "$1" in configure) # ensure /var/lib/snapd/lib/gl is cleared if dpkg --compare-versions "$2" lt-nl "2.0.7"; then ldconfig fi # Ensure that we undo the damage done by the snap.mount unit that was present # in snapd 2.31. # # We found that update scripts make systemd stop inactive mount units and this # in turn stops all the units that depend on it so when the snap.mount unit is # stopped all the per-snap mount units gets stopped along with them. The 2.31 # release was only out briefly in xenial-proposed and bionic but to keep the # affected users safe let's start all the per-snap mount units so that snaps no # longer appear as broken after update. if dpkg --compare-versions "$2" ge-nl "2.31" && \ dpkg --compare-versions "$2" lt-nl "2.32"; then units=$(systemctl list-unit-files --full | grep '^snap[-.]' | cut -f1 -d ' ' | grep -vF snap.mount.service || true) mounts=$(echo "$units" | grep '^snap[-.].*\.mount$' || true) for unit in $mounts; do # ensure its really a snap mount unit or systemd unit if ! grep -q 'What=/var/lib/snapd/snaps/' "/etc/systemd/system/$unit" && ! grep -q 'X-Snappy=yes' "/etc/systemd/system/$unit"; then echo "Skipping non-snapd systemd unit $unit" continue fi echo "Starting $unit" deb-systemd-invoke start "$unit" || true done fi # In commit 0dce4704a5d (2017-03-28, snapd v2.23.6) we renamed # /etc/apparmor.d/usr.lib.snap-confine to usr.lib.snap-confine.real # to fix LP: #1673247 - however some people (developers?) still have # the old usr.lib.snap-confine file. This seems to be loaded instead # of the correct usr.lib.snap-confine.real profile. To fix this we # use the rather blunt approach to rename the file forcefully. if test -f /etc/apparmor.d/usr.lib.snapd.snap-confine && test -f /etc/apparmor.d/usr.lib.snapd.snap-confine.real; then mv /etc/apparmor.d/usr.lib.snapd.snap-confine /etc/apparmor.d/usr.lib.snapd.snap-confine.dpkg-bak fi # Ensure that the void directory has correct permissions. chmod 111 /var/lib/snapd/void # Ubuntu 20.04 had a incorrect seed directory during development. # # This was causing hangs in the postinst when systemctl tries to # start snapd.seeded.service which will wait for snapd to finish # seeding (which will never happen because seeding is broken). # See LP: 1868706 # This snippet detect this incorrect seed and disables it. if [ -e /var/lib/snapd/seed/seed.yaml ] && [ "$(snap debug state --is-seeded /var/lib/snapd/state.json)" = "false" ]; then if ! snap debug validate-seed /var/lib/snapd/seed/seed.yaml; then echo "Found incorrect seed, disabling it" mv /var/lib/snapd/seed /var/lib/snapd/seed.disabled fi fi # ensure "snap userd" is restarted if dpkg --compare-versions "$2" lt-nl "2.45.2"; then pkill -f "snap userd" || true fi esac # Automatically added by dh_apparmor/2.13.3-7ubuntu5.4 if [ "$1" = "configure" ]; then APP_PROFILE="/etc/apparmor.d/usr.lib.snapd.snap-confine.real" if [ -f "$APP_PROFILE" ]; then # Add the local/ include LOCAL_APP_PROFILE="/etc/apparmor.d/local/usr.lib.snapd.snap-confine.real" test -e "$LOCAL_APP_PROFILE" || { mkdir -p `dirname "$LOCAL_APP_PROFILE"` install --mode 644 /dev/null "$LOCAL_APP_PROFILE" } # Reload the profile, including any abstraction updates if aa-enabled --quiet 2>/dev/null; then apparmor_parser -r -T -W "$APP_PROFILE" || true fi fi fi # End automatically added section # Automatically added by dh_systemd_enable/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then # This will only remove masks created by d-s-h on package removal. deb-systemd-helper unmask 'snapd.apparmor.service' >/dev/null || true # was-enabled defaults to true, so new installations run enable. if deb-systemd-helper --quiet was-enabled 'snapd.apparmor.service'; then # Enables the unit on first installation, creates new # symlinks on upgrades if the unit file has changed. deb-systemd-helper enable 'snapd.apparmor.service' >/dev/null || true else # Update the statefile to add new symlinks (if any), which need to be # cleaned up on purge. Also remove old symlinks. deb-systemd-helper update-state 'snapd.apparmor.service' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_enable/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then # This will only remove masks created by d-s-h on package removal. deb-systemd-helper unmask 'snapd.autoimport.service' >/dev/null || true # was-enabled defaults to true, so new installations run enable. if deb-systemd-helper --quiet was-enabled 'snapd.autoimport.service'; then # Enables the unit on first installation, creates new # symlinks on upgrades if the unit file has changed. deb-systemd-helper enable 'snapd.autoimport.service' >/dev/null || true else # Update the statefile to add new symlinks (if any), which need to be # cleaned up on purge. Also remove old symlinks. deb-systemd-helper update-state 'snapd.autoimport.service' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_enable/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then # This will only remove masks created by d-s-h on package removal. deb-systemd-helper unmask 'snapd.core-fixup.service' >/dev/null || true # was-enabled defaults to true, so new installations run enable. if deb-systemd-helper --quiet was-enabled 'snapd.core-fixup.service'; then # Enables the unit on first installation, creates new # symlinks on upgrades if the unit file has changed. deb-systemd-helper enable 'snapd.core-fixup.service' >/dev/null || true else # Update the statefile to add new symlinks (if any), which need to be # cleaned up on purge. Also remove old symlinks. deb-systemd-helper update-state 'snapd.core-fixup.service' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_enable/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then # This will only remove masks created by d-s-h on package removal. deb-systemd-helper unmask 'snapd.recovery-chooser-trigger.service' >/dev/null || true # was-enabled defaults to true, so new installations run enable. if deb-systemd-helper --quiet was-enabled 'snapd.recovery-chooser-trigger.service'; then # Enables the unit on first installation, creates new # symlinks on upgrades if the unit file has changed. deb-systemd-helper enable 'snapd.recovery-chooser-trigger.service' >/dev/null || true else # Update the statefile to add new symlinks (if any), which need to be # cleaned up on purge. Also remove old symlinks. deb-systemd-helper update-state 'snapd.recovery-chooser-trigger.service' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_enable/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then # This will only remove masks created by d-s-h on package removal. deb-systemd-helper unmask 'snapd.seeded.service' >/dev/null || true # was-enabled defaults to true, so new installations run enable. if deb-systemd-helper --quiet was-enabled 'snapd.seeded.service'; then # Enables the unit on first installation, creates new # symlinks on upgrades if the unit file has changed. deb-systemd-helper enable 'snapd.seeded.service' >/dev/null || true else # Update the statefile to add new symlinks (if any), which need to be # cleaned up on purge. Also remove old symlinks. deb-systemd-helper update-state 'snapd.seeded.service' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_enable/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then # This will only remove masks created by d-s-h on package removal. deb-systemd-helper unmask 'snapd.service' >/dev/null || true # was-enabled defaults to true, so new installations run enable. if deb-systemd-helper --quiet was-enabled 'snapd.service'; then # Enables the unit on first installation, creates new # symlinks on upgrades if the unit file has changed. deb-systemd-helper enable 'snapd.service' >/dev/null || true else # Update the statefile to add new symlinks (if any), which need to be # cleaned up on purge. Also remove old symlinks. deb-systemd-helper update-state 'snapd.service' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_enable/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then # This will only remove masks created by d-s-h on package removal. deb-systemd-helper unmask 'snapd.snap-repair.timer' >/dev/null || true # was-enabled defaults to true, so new installations run enable. if deb-systemd-helper --quiet was-enabled 'snapd.snap-repair.timer'; then # Enables the unit on first installation, creates new # symlinks on upgrades if the unit file has changed. deb-systemd-helper enable 'snapd.snap-repair.timer' >/dev/null || true else # Update the statefile to add new symlinks (if any), which need to be # cleaned up on purge. Also remove old symlinks. deb-systemd-helper update-state 'snapd.snap-repair.timer' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_enable/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then # This will only remove masks created by d-s-h on package removal. deb-systemd-helper unmask 'snapd.socket' >/dev/null || true # was-enabled defaults to true, so new installations run enable. if deb-systemd-helper --quiet was-enabled 'snapd.socket'; then # Enables the unit on first installation, creates new # symlinks on upgrades if the unit file has changed. deb-systemd-helper enable 'snapd.socket' >/dev/null || true else # Update the statefile to add new symlinks (if any), which need to be # cleaned up on purge. Also remove old symlinks. deb-systemd-helper update-state 'snapd.socket' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_enable/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then # This will only remove masks created by d-s-h on package removal. deb-systemd-helper unmask 'snapd.system-shutdown.service' >/dev/null || true # was-enabled defaults to true, so new installations run enable. if deb-systemd-helper --quiet was-enabled 'snapd.system-shutdown.service'; then # Enables the unit on first installation, creates new # symlinks on upgrades if the unit file has changed. deb-systemd-helper enable 'snapd.system-shutdown.service' >/dev/null || true else # Update the statefile to add new symlinks (if any), which need to be # cleaned up on purge. Also remove old symlinks. deb-systemd-helper update-state 'snapd.system-shutdown.service' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_installinit/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then # In case this system is running systemd, we need to ensure that all # necessary tmpfiles (if any) are created before starting. if [ -d /run/systemd/system ] ; then systemd-tmpfiles --create snapd.conf >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_start/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then if [ -d /run/systemd/system ]; then systemctl --system daemon-reload >/dev/null || true if [ -n "$2" ]; then _dh_action=restart else _dh_action=start fi deb-systemd-invoke $_dh_action 'snapd.socket' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_start/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then if [ -d /run/systemd/system ]; then systemctl --system daemon-reload >/dev/null || true if [ -n "$2" ]; then _dh_action=restart else _dh_action=start fi deb-systemd-invoke $_dh_action 'snapd.service' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_systemd_start/12.10ubuntu1 if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then if [ -d /run/systemd/system ]; then systemctl --system daemon-reload >/dev/null || true if [ -n "$2" ]; then _dh_action=restart else _dh_action=start fi deb-systemd-invoke $_dh_action 'snapd.apparmor.service' 'snapd.autoimport.service' 'snapd.core-fixup.service' 'snapd.failure.service' 'snapd.mounts-pre.target' 'snapd.mounts.target' 'snapd.recovery-chooser-trigger.service' 'snapd.seeded.service' 'snapd.snap-repair.service' 'snapd.snap-repair.timer' 'snapd.system-shutdown.service' >/dev/null || true fi fi # End automatically added section # Automatically added by dh_installdeb/12.10ubuntu1 dpkg-maintscript-helper rm_conffile /etc/apparmor.d/usr.lib.snapd.snap-confine 2.23.6~ -- "$@" # End automatically added section # Automatically added by dh_installdeb/12.10ubuntu1 dpkg-maintscript-helper rm_conffile /etc/grub.d/09_snappy 1.7.3ubuntu1 -- "$@" # End automatically added section # Automatically added by dh_installdeb/12.10ubuntu1 dpkg-maintscript-helper rm_conffile /etc/ld.so.conf.d/snappy.conf 2.0.7~ -- "$@" # End automatically added section # Automatically added by dh_installdeb/12.10ubuntu1 dpkg-maintscript-helper rm_conffile /etc/sudoers.d/99-snapd.conf 2.50~ -- "$@" # End automatically added section