UnknownSec Bypass 403

: /lib/grub-legacy/ [ drwxr-xr-x ]
name : update-grub #!/bin/bash # # Insert a list of installed kernels in a grub config file # Copyright 2001 Wichert Akkerman <wichert@linux.com> # Copyright (C) 2007,2008 Free Software Foundation, Inc. # # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GRUB. If not, see <http://www.gnu.org/licenses/>. # # Contributors: # Jason Thomas <jason@debian.org> # David B.Harris <dbarclay10@yahoo.ca> # Marc Haber <mh+debian-packages@zugschlus.de> # Crispin Flowerday <crispin@zeus.com> # Abort on errors set -e host_os=`uname -s | tr '[A-Z]' '[a-z]'` abort() { message=$@ echo >&2 echo -e "$message" >&2 echo >&2 exit 1 } find_grub_dir () { echo -n "Searching for GRUB installation directory ... " >&2 for d in /boot/grub /boot/boot/grub ; do if [ -d "$d" ] ; then grub_dir="$d" break fi done if [ -z "$grub_dir" ] ; then abort "No GRUB directory found.\n To create a template run 'mkdir /boot/grub' first.\n To install grub, install it manually or try the 'grub-install' command.\n ### Warning, grub-install is used to change your MBR. ###" else echo "found: $grub_dir" >&2 fi echo $grub_dir } # This function was borrowed from grub2/util/update-grub_lib.in make_system_path_relative_to_its_root () { path=$1 # abort if file doesn't exist if test -e $path ; then : ;else return 1 fi # canonicalize if path=`readlink -f $path` ; then : ; else return 1 fi # if not a directory, climb up to the directory containing it if test -d $path ; then dir=$path else dir=`echo $path | sed -e "s,/[^/]*$,,g"` fi num=`stat -c %d $dir` # this loop sets $dir to the root directory of the filesystem we're inspecting while : ; do parent=`readlink -f $dir/..` if [ "x`stat -c %d $parent`" = "x$num" ] ; then : ; else # $parent is another filesystem; we found it. break fi if [ "x$dir" = "x/" ] ; then # / is our root. break fi dir=$parent done # This function never prints trailing slashes (so that its output can be # appended a slash unconditionally). Each slash in $dir is considered a # preceding slash, and therefore the root directory is an empty string. if [ "$dir" = "/" ] ; then dir="" fi echo $path | sed -e "s,^$dir,,g" } # The grub installation directory grub_dir=$(find_grub_dir) # Full path to the device.map device_map=$grub_dir/device.map find_device () { if ! test -e ${device_map} ; then echo quit | grub --batch --no-floppy --device-map=${device_map} > /dev/null fi grub-probe --device-map=${device_map} -t device $1 2> /dev/null } # Usage: convert_raid1 os_device # Checks if os_device is a software raid1. # If so, converts to first physical device in array. convert_raid1 () { case $1 in /dev/md[0-9] | /dev/md/[0-9]) : ;; # Continue *) return 1 ;; esac [ -x /sbin/mdadm ] || return 1 # Check that the raid device is raid1 raidlevel=$(mdadm -D -b $1 | grep "^ARRAY" | \ sed "s/^.*level=//" | cut -d" " -f1) [ "$raidlevel" = "raid1" ] || return 1 # Take only the first device that makes up the raid raiddev=$(mdadm -D $1 | grep -A1 "Number" | grep "dev" \ | sed "s/^.*\(\/dev\/.*\)$/\1/") [ -n "$raiddev" ] || return 1 echo $raiddev return 0 } # Usage: convert os_device # Convert an OS device to the corresponding GRUB drive. convert () { if ! test -e ${device_map} ; then echo quit | grub --batch --no-floppy --device-map=${device_map} > /dev/null fi GRUB_LEGACY_0_BASED_PARTITIONS=1 grub-probe --device-map=${device_map} -t drive -d "$1" 2> /dev/null || { echo "warning: grub-probe can't find drive for $1." >&2 tmp_map=$(mktemp -t device.map.XXXXXXXX) grub-mkdevicemap --device-map=${tmp_map} --no-floppy >/dev/null 2>&1 || true GRUB_LEGACY_0_BASED_PARTITIONS=1 grub-probe --device-map=${tmp_map} -t drive -d "$1" || { rm -f ${tmp_map} return 1 } echo "Please check ${device_map}, you might have to regenerate it with grub-mkdevicemap." >&2 rm -f ${tmp_map} } } # Usage: convert_default os_device # Convert an OS device to the corresponding GRUB drive. convert_default () { # Check if device is software raid1 array if tmp_dev=$(convert_raid1 $1 2>/dev/null) ; then : # Use device returned by convert_raid1 else tmp_dev=$1 fi convert $tmp_dev } ## Configuration Options # Full path to the menu.lst menu_file_basename=menu.lst menu_file=$grub_dir/$menu_file_basename # Full path to the default file default_file_basename=default default_file=$grub_dir/$default_file_basename # the device for the / filesystem root_device=$(find_device "/") # loop-AES arranges things so that /dev/loop/X can be our root device, but # the initrds that Linux uses don't like that. case ${root_device} in /dev/loop/*|/dev/loop[0-9]) root_device=`losetup ${root_device} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"` ;; esac # the device for the /boot filesystem boot_device=$(find_device "/boot") # where grub looks for the kernels at boot time kernel_dir=`make_system_path_relative_to_its_root /boot` # the "-t abstraction" check is a workaround untill #484297 is fixed if abstraction=`grub-probe -t abstraction --device ${root_device} 2> /dev/null` && [ "$abstraction" = "" ] && \ root_uuid=`grub-probe --device-map=${device_map} --device ${root_device} --target=fs_uuid 2> /dev/null` && \ test -e "/dev/disk/by-uuid/${root_uuid}" ; then linux_root_device=UUID=${root_uuid} else linux_root_device=${root_device} fi # Default kernel options, overidden by the kopt statement in the menufile. kopt="root=$linux_root_device ro" # Title title=$(lsb_release --short --description 2>/dev/null) || title="Ubuntu" # should update-grub remember the default entry updatedefaultentry="false" # Drive(in GRUB terms) where the kernel is located. Overridden by the # groot statement in menufile. grub_root_device=$(convert_default "$boot_device") # should grub create the alternative boot options in the menu alternative="true" # should grub lock the alternative boot options in the menu lockalternative="false" # additional options to use with the default boot option, but not with the # alternatives defoptions="quiet splash" # should grub lock the old kernels lockold="false" # Xen hypervisor options to use with the default Xen boot option xenhopt="" # Xen Linux kernel options to use with the default Xen boot option xenkopt="console=tty0" # options to use with the alternative boot options altoptions="(recovery mode) single" # controls howmany kernels are listed in the config file, # this does not include the alternative kernels howmany="all" # should grub create a memtest86 entry memtest86="true" # should grub add "savedefault" to default boot options savedefault="false" # stores the command line arguments command_line_arguments=$1 # does this version of grub support the quiet option? if [ -f ${grub_dir}/installed-version ] && dpkg --compare-versions `cat ${grub_dir}/installed-version` ge 0.97-11ubuntu4; then supports_quiet=true else supports_quiet=false fi # read user configuration if test -f "/etc/default/grub" ; then . /etc/default/grub fi # Default options to use in a new config file. This will only be used if $menu_file # doesn't already exist. Only edit the lines between the two "EOF"s. The others are # part of the script. newtemplate=$(tempfile) cat > "$newtemplate" <<EOF # $menu_file_basename - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-legacy-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not change this entry to 'saved' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 5 # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 \$1\$gLhU0/\$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST EOF ## End Configuration Options echo -n "Searching for default file ... " >&2 if [ -f "$default_file" ] ; then echo "found: $default_file" >&2 else echo "Generating $default_file file and setting the default boot entry to 0" >&2 if [ -f /usr/lib/grub-legacy/grub-set-default ] ; then /usr/lib/grub-legacy/grub-set-default 0 else grub-set-default 0 fi fi # Make sure we use the standard sorting order LC_COLLATE=C # Magic markers we use start="### BEGIN AUTOMAGIC KERNELS LIST" end="### END DEBIAN AUTOMAGIC KERNELS LIST" startopt="## ## Start Default Options ##" endopt="## ## End Default Options ##" # Extract options from config file ExtractMenuOpt() { opt=$1 sed -ne "/^$start\$/,/^$end\$/ { /^$startopt\$/,/^$endopt\$/ { /^# $opt=/ { s/^# $opt=\(.*\)\$/\1/ p } } }" $menu } GetMenuOpts() { opt=$1 sed -ne "/^$start\$/,/^$end\$/ { /^$startopt\$/,/^$endopt\$/ { /^# $opt=/ { p } } }" $menu } ExtractMenuOpts() { opt=$1 GetMenuOpts $opt | sed "s/^# $opt=\(.*\)\$/\1=\"\2\"/" } GetMenuOpt() { opt=$1 value=$2 [ -z "$(GetMenuOpts "$opt")" ] || value=$(ExtractMenuOpt "$opt") echo $value } # Compares two version strings A and B # Returns -1 if A<B # 0 if A==B # 1 if A>B # This compares version numbers of the form # 2.4.14.2 > 2.4.14 # 2.4.14random = 2.4.14-random > 2.4.14-ac10 > 2.4.14 > 2.4.14-pre2 > # 2.4.14-pre1 > 2.4.13-ac99 CompareVersions() { local sedexp="s,.*/vmlinu[zx]-,,g;s/[._-]\(pre\|rc\|test\|git\|trunk\)/~\1/g" local a=`echo $1 | sed -e "$sedexp"` local b=`echo $2 | sed -e "$sedexp"` if [ "$a" = "$b" ] ; then echo 0 elif dpkg --compare-versions "$a" gt "$b" ; then echo 1 else echo -1 fi } # looks in the directory specified for an initrd image with the version specified FindInitrdName() { # strip trailing slashes directory=$(echo $1 | sed -e 's#/*$##') version=$2 # initrd # initrd.img # initrd-lvm # .*.gz initrdName="" names="initrd initrd.img initrd-lvm" compressed="gz" for n in $names ; do # make sure we haven't already found it if [ -z "$initrdName" ] ; then if [ -f "$directory/$n$version" ] ; then initrdName="$n$version" break else for c in $compressed ; do if [ -f "$directory/$n$version.$c" ] ; then initrdName="$n$version.$c" break fi done fi else break fi done # return the result echo $initrdName } FindXenHypervisorVersions () { version=$1 if [ -f "/var/lib/linux-image-$version/xen-versions" ]; then ret="$(cat /var/lib/linux-image-$version/xen-versions)" fi echo $ret } get_kernel_opt() { kernel_version=$1 version=$(echo $kernel_version | sed 's/^[^0-9]*//') version=$(echo $version | sed 's/[-\+\.]/_/g') if [ -n "$version" ] ; then while [ -n "$version" ] ; do currentOpt="$(eval "echo \${kopt_$version}")" if [ -n "$currentOpt" ] ; then break fi version=$(echo $version | sed 's/_\?[^_]*$//') done fi if [ -z "$currentOpt" ] ; then currentOpt=$kopt fi echo $currentOpt } write_kernel_entry() { local kernel_version; kernel_version=$1; shift local recovery_desc; recovery_desc=$1; shift local lock_alternative; lock_alternative=$1; shift local grub_root_device; grub_root_device=$1; shift local kernel; kernel=$1; shift local kernel_options; kernel_options=$1; shift local recovery_suffix; recovery_suffix=$1; shift local initrd; initrd=$1; shift local savedefault; savedefault=$1; shift local lockold; lockold=$1; shift local hypervisor if [ -n "$1" ]; then # Hypervisor. hypervisor=$1; shift local hypervisor_image; hypervisor_image=$1; shift local hypervisor_version; hypervisor_version=$1; shift local hypervisor_options; hypervisor_options=$1; shift fi local grub_root_type case "$grub_root_device" in [^A-Za-z0-9]*) grub_root_type='root' ;; *) grub_root_type='uuid' ;; esac echo -n "title " >> $buffer if [ -n "$hypervisor" ]; then echo -n "$hypervisor $hypervisor_version / " >> $buffer fi echo -n "$title" >> $buffer if [ -n "$kernel_version" ]; then echo -n ", " >> $buffer # memtest86 is not strictly a kernel if ! echo "$kernel_version" | grep -q ^memtest86; then echo -n "kernel " >> $buffer fi echo -n "$kernel_version" >> $buffer fi if [ -n "$recovery_desc" ]; then echo -n " $recovery_desc" >> $buffer fi echo >> $buffer # lock the alternative options if test x"$lock_alternative" = x"true" ; then echo "lock" >> $buffer fi # lock the old entries if test x"$lockold" = x"true" ; then echo "lock" >> $buffer fi echo "$grub_root_type $grub_root_device" >> $buffer echo -n "kernel " >> $buffer if [ -n "$hypervisor" ]; then echo -n "$hypervisor_image" >> $buffer if [ -n "$hypervisor_options" ]; then echo -n " $hypervisor_options" >> $buffer fi echo >> $buffer echo -n "module " >> $buffer fi echo -n "$kernel" >> $buffer if [ -n "$kernel_options" ]; then echo -n " $kernel_options" >> $buffer fi if [ -n "$recovery_desc" ]; then echo -n " $recovery_suffix" >> $buffer fi echo >> $buffer if [ -n "$initrd" ]; then if [ -n "$hypervisor" ]; then echo -n "module " >> $buffer else echo -n "initrd " >> $buffer fi echo "$initrd" >> $buffer fi if [ ! -n "$recovery_desc" -a x"$supports_quiet" = x"true" ]; then echo "quiet" >> $buffer fi if test x"$savedefault" = x"true" ; then echo "savedefault" >> $buffer fi echo >> $buffer } echo -n "Testing for an existing GRUB $menu_file_basename file ... " >&2 # Test if our menu file exists if [ -f "$menu_file" ] ; then menu="$menu_file" rm -f $newtemplate unset newtemplate echo "found: $menu_file" >&2 cp -f "$menu_file" "$menu_file~" else # if not ask user if they want us to create one menu="$menu_file" echo >&2 echo >&2 if [ "-y" = "$command_line_arguments" ] ; then echo "Warning: ignoring deprecated -y option." >&2 fi echo >&2 echo "Generating $menu_file" >&2 cat "$newtemplate" > $menu_file rm -f $newtemplate unset newtemplate fi # Extract the kernel options to use kopt=$(GetMenuOpt "kopt" "$kopt") # Set the kernel 2.6 option only for fresh install test -z "$(GetMenuOpt "kopt" "")" && kopt_2_6="root=$linux_root_device ro" # Extract options for specific kernels opts="$(ExtractMenuOpts "\(kopt_[[:alnum:]_]\+\)")" test -z "$opts" || eval "$opts" CustomKopts=$(GetMenuOpts "\(kopt_[[:alnum:]_]\+\)") # Extract the grub root grub_root_device=$(GetMenuOpt "groot" "$grub_root_device") # Extract the old recovery value alternative=$(GetMenuOpt "recovery" "$alternative") # Extract the alternative value alternative=$(GetMenuOpt "alternative" "$alternative") # Extract the lockalternative value lockalternative=$(GetMenuOpt "lockalternative" "$lockalternative") # Extract the additional default options defoptions=$(GetMenuOpt "defoptions" "$defoptions") # Extract the lockold value lockold=$(GetMenuOpt "lockold" "$lockold") # Extract Xen hypervisor options xenhopt=$(GetMenuOpt "xenhopt" "$xenhopt") # Extract Xen Linux kernel options xenkopt=$(GetMenuOpt "xenkopt" "$xenkopt") # Extract the howmany value howmany=$(GetMenuOpt "howmany" "$howmany") # Extract the memtest86 value memtest86=$(GetMenuOpt "memtest86" "$memtest86") # Extract the updatedefaultentry option updatedefaultentry=$(GetMenuOpt "updatedefaultentry" "$updatedefaultentry") # Extract the savedefault option savedefault=$(GetMenuOpt "savedefault" "$savedefault") # Generate the menu options we want to insert buffer=$(tempfile) echo $start >> $buffer echo "## lines between the AUTOMAGIC KERNELS LIST markers will be modified" >> $buffer echo "## by the debian update-grub script except for the default options below" >> $buffer echo >> $buffer echo "## DO NOT UNCOMMENT THEM, Just edit them to your needs" >> $buffer echo >> $buffer echo "## ## Start Default Options ##" >> $buffer echo "## default kernel options" >> $buffer echo "## default kernel options for automagic boot options" >> $buffer echo "## If you want special options for specific kernels use kopt_x_y_z" >> $buffer echo "## where x.y.z is kernel version. Minor versions can be omitted." >> $buffer echo "## e.g. kopt=root=/dev/hda1 ro" >> $buffer echo "## kopt_2_6_8=root=/dev/hdc1 ro" >> $buffer echo "## kopt_2_6_8_2_686=root=/dev/hdc2 ro" >> $buffer echo "# kopt=$kopt" >> $buffer if [ -n "$CustomKopts" ] ; then echo "$CustomKopts" >> $buffer elif [ -n "$kopt_2_6" ] && [ "$kopt" != "$kopt_2_6" ]; then echo "# kopt_2_6=$kopt_2_6" >> $buffer fi echo >> $buffer echo "## default grub root device" >> $buffer echo "## e.g. groot=(hd0,0)" >> $buffer echo "# groot=$grub_root_device" >> $buffer echo >> $buffer echo "## should update-grub create alternative automagic boot options" >> $buffer echo "## e.g. alternative=true" >> $buffer echo "## alternative=false" >> $buffer echo "# alternative=$alternative" >> $buffer echo >> $buffer echo "## should update-grub lock alternative automagic boot options" >> $buffer echo "## e.g. lockalternative=true" >> $buffer echo "## lockalternative=false" >> $buffer echo "# lockalternative=$lockalternative" >> $buffer echo >> $buffer echo "## additional options to use with the default boot option, but not with the" >> $buffer echo "## alternatives" >> $buffer echo "## e.g. defoptions=vga=791 resume=/dev/hda5" >> $buffer echo "# defoptions=$defoptions" >> $buffer echo >> $buffer echo "## should update-grub lock old automagic boot options" >> $buffer echo "## e.g. lockold=false" >> $buffer echo "## lockold=true" >> $buffer echo "# lockold=$lockold" >> $buffer echo >> $buffer echo "## Xen hypervisor options to use with the default Xen boot option" >> $buffer echo "# xenhopt=$xenhopt" >> $buffer echo >> $buffer echo "## Xen Linux kernel options to use with the default Xen boot option" >> $buffer echo "# xenkopt=$xenkopt" >> $buffer echo >> $buffer echo "## altoption boot targets option" >> $buffer echo "## multiple altoptions lines are allowed" >> $buffer echo "## e.g. altoptions=(extra menu suffix) extra boot options" >> $buffer echo "## altoptions=(recovery) single" >> $buffer if ! grep -q "^# altoptions" $menu ; then echo "# altoptions=$altoptions" >> $buffer else grep "^# altoptions" $menu >> $buffer fi echo >> $buffer echo "## controls how many kernels should be put into the $menu_file_basename" >> $buffer echo "## only counts the first occurence of a kernel, not the" >> $buffer echo "## alternative kernel options" >> $buffer echo "## e.g. howmany=all" >> $buffer echo "## howmany=7" >> $buffer echo "# howmany=$howmany" >> $buffer echo >> $buffer echo "## should update-grub create memtest86 boot option" >> $buffer echo "## e.g. memtest86=true" >> $buffer echo "## memtest86=false" >> $buffer echo "# memtest86=$memtest86" >> $buffer echo >> $buffer echo "## should update-grub adjust the value of the default booted system" >> $buffer echo "## can be true or false" >> $buffer echo "# updatedefaultentry=$updatedefaultentry" >> $buffer echo >> $buffer echo "## should update-grub add savedefault to the default options" >> $buffer echo "## can be true or false" >> $buffer echo "# savedefault=$savedefault" >> $buffer echo >> $buffer echo "## ## End Default Options ##" >> $buffer echo >> $buffer echo -n "Searching for splash image ... " >&2 current_splash=`grep '^splashimage=' ${menu_file} || true` grub_dir_rel=`make_system_path_relative_to_its_root $grub_dir` splashimage_path="splashimage=${grub_root_device}/${grub_dir_rel##${kernel_dir}}/splash.xpm.gz" if [ `sed -e "/^$start/,/^$end/d" $menu_file | grep -c '^splashimage='` != "0" ] ; then #checks for splashscreen defined outside the autoupdated part splashimage=$(grep '^splashimage=' ${menu_file}) echo "found: ${splashimage##*=}" >&2 echo >&2 elif [ -f "${grub_dir}/splash.xpm.gz" ] && [ "$current_splash" = "" ]; then echo "found: /boot/grub/splash.xpm.gz" >&2 echo "$splashimage_path" >> $buffer echo >> $buffer elif [ -f "${grub_dir}/splash.xpm.gz" ] && [ "$current_splash" = "$splashimage_path" ]; then echo "found: /boot/grub/splash.xpm.gz" >&2 echo "$splashimage_path" >> $buffer echo >> $buffer elif [ "$current_splash" != "" ] && [ "$current_splash" != "$splashimage_path" ]; then echo "found but preserving previous setting: $(grep '^splashimage=' ${menu_file})" >&2 echo "$current_splash" >> $buffer echo >> $buffer else echo "none found, skipping ..." >&2 fi xen0Kernels="" # First kernels with xen0 support. for ver in `grep -l CONFIG_XEN=y /boot/config* | sed -e s%/boot/config-%%`; do if ! grep -q CONFIG_XEN_PRIVILEGED_GUEST=y /boot/config-$ver ; then continue fi # ver is a kernel version kern="/boot/vmlinuz-$ver" if [ -r $kern ] ; then newerKernels="" for i in $xen0Kernels ; do res=$(CompareVersions "$kern" "$i") if [ "$kern" != "" ] && [ "$res" -gt 0 ] ; then newerKernels="$newerKernels $kern $i" kern="" else newerKernels="$newerKernels $i" fi done if [ "$kern" != "" ] ; then newerKernels="$newerKernels $kern" fi xen0Kernels="$newerKernels" fi done sortedKernels="" for kern in $(/bin/ls -1vr /boot | grep -v "dpkg-*" | grep "^vmlinuz-") ; do kern="/boot/$kern" newerKernels="" for i in $sortedKernels ; do res=$(CompareVersions "$kern" "$i") if [ "$kern" != "" ] && [ "$res" -gt 0 ] ; then newerKernels="$newerKernels $kern $i" kern="" else newerKernels="$newerKernels $i" fi done if [ "$kern" != "" ] ; then newerKernels="$newerKernels $kern" fi sortedKernels="$newerKernels" done if test -f "/boot/vmlinuz.old" ; then sortedKernels="/boot/vmlinuz.old $sortedKernels" fi if test -f "/boot/vmlinuz" ; then sortedKernels="/boot/vmlinuz $sortedKernels" fi hypervisors="" for hyp in /boot/xen-*.gz; do if [ ! -h "$hyp" ] && [ -f "$hyp" ]; then hypervisors="$hypervisors `basename "$hyp"`" fi done #Finding the value the default line use_grub_set_default="false" if test "$updatedefaultentry" = "true" ; then defaultEntryNumber=$(sed -ne 's/^[[:blank:]]*default[[:blank:]]*\(.*\).*/\1/p' $menu) if [ "$defaultEntryNumber" = "saved" ] ; then defaultEntryNumber=$(sed 'q' "$grub_dir/default") use_grub_set_default="true" fi if test -n "$defaultEntryNumber"; then defaultEntryNumberPlusOne=$(expr $defaultEntryNumber \+ 1); defaultEntry=$(grep "^[[:blank:]]*title" $menu | sed -ne "${defaultEntryNumberPlusOne}p" | sed -ne ";s/^[[:blank:]]*title[[:blank:]]*//p") defaultEntry=$(echo $defaultEntry | sed -e "s/[[:blank:]]*$//") # don't trust trailing blanks else notChangeDefault="yes" fi else notChangeDefault="yes" fi ## heres where we start writing out the kernel entries counter=0 case "$grub_root_device" in [^A-Za-z0-9]*) grub_root_type='root' ;; *) grub_root_type='uuid' ;; esac grub2name="${kernel_dir}/grub/core.img" if [ "$LET_US_TRY_GRUB_2" = "true" ] \ && test -f /boot/grub/core.img ; then echo "Found GRUB 2: $grub2name" >&2 cat >> $buffer << EOF title Chainload into GRUB 2 $grub_root_type $grub_root_device kernel $grub2name title `echo ───────────────────────────────────────────────────────────────────── | iconv -f utf-8 -t cp437` root title When you have verified GRUB 2 works, you can use this command to root title complete the upgrade: upgrade-from-grub-legacy root title `echo ───────────────────────────────────────────────────────────────────── | iconv -f utf-8 -t cp437` root EOF fi # Xen entries first. for kern in $xen0Kernels ; do if test ! x"$howmany" = x"all" ; then if [ $counter -gt $howmany ] ; then break fi fi kernelName=$(basename $kern) kernelVersion=$(echo $kernelName | sed -e 's/vmlinuz//') initrdName=$(FindInitrdName "/boot" "$kernelVersion") initrd="" kernel=$kernel_dir/$kernelName if [ -n "$initrdName" ] ; then initrd=$kernel_dir/$initrdName fi kernelVersion=$(echo $kernelVersion | sed -e 's/^-//') currentOpt=$(get_kernel_opt $kernelVersion) hypervisorVersions=$(FindXenHypervisorVersions "$kernelVersion") found= for hypervisorVersion in $hypervisorVersions; do hypervisor="$kernel_dir/xen-$hypervisorVersion.gz" if [ -e "$hypervisor" ]; then found=1 echo "Found Xen hypervisor $hypervisorVersion, kernel: $kernel" >&2 write_kernel_entry "$kernelVersion" '' '' "$grub_root_device" \ "$kernel" "$currentOpt $xenkopt" '' "$initrd" "$savedefault" '' \ Xen "$hypervisor" "$hypervisorVersion" "$xenhopt" counter=$(($counter + 1)) fi done if [ -z $found ]; then for hypervisor in $hypervisors; do hypVersion=`basename "$hypervisor" .gz | sed s%xen-%%` echo "Found Xen hypervisor $hypVersion, kernel: $kernel" >&2 write_kernel_entry "$kernelVersion" '' '' "$grub_root_device" \ "$kernel" "$currentOpt $xenkopt" '' "$initrd" "$savedefault" '' \ Xen "$kernel_dir/$hypervisor" "$hypVersion" "$xenhopt" counter=$(($counter + 1)) done fi done for kern in $sortedKernels ; do counter=$(($counter + 1)) if test ! x"$howmany" = x"all" ; then if [ $counter -gt $howmany ] ; then break fi fi kernelName=$(basename $kern) kernelVersion=$(echo $kernelName | sed -e 's/vmlinuz//') initrdName=$(FindInitrdName "/boot" "$kernelVersion") initrd="" kernel=$kernel_dir/$kernelName if [ -n "$initrdName" ] ; then initrd=$kernel_dir/$initrdName fi echo "Found kernel: $kernel" >&2 if [ "$kernelName" = "vmlinuz" ]; then if [ -L "/boot/$kernelName" ]; then kernelVersion=`readlink -f "/boot/$kernelName"` kernelVersion=$(echo $kernelVersion | sed -e 's/.*vmlinuz-//') kernelVersion="$kernelVersion Default" else kernelVersion="Default" fi fi if [ "$kernelName" = "vmlinuz.old" ]; then if [ -L "/boot/$kernelName" ]; then kernelVersion=`readlink -f "/boot/$kernelName"` kernelVersion=$(echo $kernelVersion | sed -e 's/.*vmlinuz-//') kernelVersion="$kernelVersion Previous" else kernelVersion="Previous" fi fi kernelVersion=$(echo $kernelVersion | sed -e 's/^-//') currentOpt=$(get_kernel_opt $kernelVersion) do_lockold=$lockold # do not lockold for the first entry [ $counter -eq 1 ] && do_lockold=false write_kernel_entry "$kernelVersion" "" "" "$grub_root_device" "$kernel" \ "$currentOpt $defoptions" "" "$initrd" "$savedefault" "$do_lockold" # insert the alternative boot options if test ! x"$alternative" = x"false" ; then # for each altoptions line do this stuff sed -ne 's/# altoptions=\(.*\)/\1/p' $buffer | while read line; do descr=$(echo $line | sed -ne 's/\(([^)]*)\)[[:space:]]\(.*\)/\1/p') suffix=$(echo $line | sed -ne 's/\(([^)]*)\)[[:space:]]\(.*\)/\2/p') test x"$lockalternative" = x"true" && do_lockold=false write_kernel_entry "$kernelVersion" "$descr" "$lockalternative" \ "$grub_root_device" "$kernel" "$currentOpt" "$suffix" "$initrd" \ "$savedefault" "$do_lockold" done fi done memtest86names="memtest86 memtest86+" if test ! x"$memtest86" = x"false" ; then for name in $memtest86names ; do if test -f "/boot/$name.bin" ; then kernelVersion="$name" kernel="$kernel_dir/$name.bin" currentOpt= initrd= echo "Found kernel: $kernel" >&2 write_kernel_entry "$kernelVersion" "" "" "$grub_root_device" \ "$kernel" "$currentOpt" "" "$initrd" "false" "" fi done fi echo $end >> $buffer echo -n "Updating $menu ... " >&2 # Insert the new options into the menu if ! grep -q "^$start" $menu ; then cat $buffer >> $menu rm -f $buffer else umask 077 sed -e "/^$start/,/^$end/{ /^$start/r $buffer d } " $menu > $menu.new cat $menu.new > $menu rm -f $buffer $menu.new fi # Function to update the default value set_default_value() { if [ "$use_grub_set_default" = "true" ] ; then if [ -f /usr/lib/grub-legacy/grub-set-default ] ; then /usr/lib/grub-legacy/grub-set-default $1 else grub-set-default $1 fi else value="$1" newmenu=$(tempfile) sed -e "s/^[[:blank:]]*default[[:blank:]]*[[:digit:]]*\(.*\)/default ${value}\1/;b" $menu > $newmenu cat $newmenu > $menu rm -f $newmenu unset newmenu fi } #Updating the default number if [ "$LET_US_TRY_GRUB_2" = "true" ] && test -f /boot/grub/core.img ; then set_default_value "0" elif test -z "$notChangeDefault"; then newDefaultNumberPlusOne=$(grep "^[[:blank:]]*title[[:blank:]]*" $menu | grep -n "${defaultEntry}" | cut -f1 -d ":" | sed -ne "1p") if test -z "$newDefaultNumberPlusOne"; then echo "Previous default entry removed, resetting to 0">&2 set_default_value "0" elif test -z "$defaultEntry"; then echo "Value of default value matches no entry, resetting to 0" >&2 set_default_value "0" else if test "$newDefaultNumberPlusOne" = "1"; then newDefaultNumber="0" else newDefaultNumber=$(expr $newDefaultNumberPlusOne - 1) fi echo "Updating the default booting kernel">&2 set_default_value "$newDefaultNumber" fi fi echo "done" >&2 echo >&2